Anatometal
Titanium Disk Threadless Attachment
Titanium Disk Threadless Attachment
Couldn't load pickup availability
Flat disk attachments made from ASTM F-136 implant grade certified titanium.
Jewellery specifications:
- Solid ASTM F-136 implant grade certified titanium
- Sizes 1.5mm up to 5mm
- Threadless pin; made to fit our threadless labret posts. Sold separately
- Lifetime quality guarantee
- Single item only. For a set, please order two.
PLEASE NOTE:
Our disks are from both NeoMetal and Anatometal. There are some slight variances in make. If you are buying more than one, please specify if you would like them to be matching.
Shop With Confidence
Commonly Worn Sizes
Commonly Worn Sizes
These sizes are intended as a guide only - each piercing will vary depending on anatomy and specific placement. If you are unsure of what size will be appropriate for you, we recommend that you see us to be measured. Otherwise you can email us photos of your piercing and we will do our best to help from there!| Piercing | Jewellery Type | Gauge | Length/Diameter |
| Earlobe - stud | Labret | 18ga | 1/4" - 5/16" |
| Earlobe - ring | Ring | 18ga | 5/16" - 3/8" + |
| Helix - stud | Labret | 16ga | 1/4" - 5/16" |
| Helix - ring | Ring | 16ga | 5/16" - 3/8" |
| Tragus | Labret | 18ga - 16ga | 1/4" - 5/16" |
| Rook | Curved Barbell | 16ga | 5/16" |
| Conch - stud | Straight Barbell / Labret | 16ga - 14ga | 5/16" |
| Conch - ring | Ring | 14ga + | 1/2" + |
| Daith | Ring | 18ga - 16ga | 5/16" - 7/16" |
| Eyebrow | Curved Barbell | 16ga | 5/16" |
| Nostril - stud | Labret | 18ga | 1/4" - 9/32" |
| Nostril - ring | Ring | 18ga | 5/16" |
| Septum | Ring | 16ga - 14ga | 5/16" - 3/8" |
| Bridge | Straight Barbell | 14ga - 12ga | 1/2" - 5/8" |
| Lip | Labret | 16ga | 5/16" |
| Tongue | Straight Barbell | 14ga | 9/16" |
| Nipple | Straight Barbell | 14ga | 1/2" - 5/8" |
| Navel | Curved Barbell / Navel Curve | 14ga | 5/16" - 7/16" |
Jewellery Size Conversion Chart
Jewellery Size Conversion Chart
Most of the high quality jewellery that we carry is hand made in the US. As such, this jewellery is measured using the imperial system (ie. "gauge" and inches). Use this table to convert these measurements to millimetres.
| Gauge | mm | Inches | mm |
| 20ga | 0.8mm | 3/16" | 4.5mm |
| 18ga | 1mm | 7/32" | 5.5mm |
| 16ga | 1.2mm | 1/4" | 6.5mm |
| 14ga | 1.6mm | 9/32" | 7.1mm |
| 12ga | 2mm | 5/16" | 7.9mm |
| 10ga | 2.6mm | 11/32" | 8.7mm |
| 8ga | 3.2mm | 3/8" | 9.5mm |
| 6ga | 4mm | 7/16" | 11.1mm |
| 4ga | 5mm | 1/2" | 12.5mm |
| 2ga | 6.5mm | 9/16" | 14mm |
| 0ga | 8.2mm | 5/8" | 16mm |
| 00ga | 9.5mm | 11/16" | 17.5mm |
| 000ga | 10.5mm | 3/4" | 19mm |
| 0000ga | 11.7mm | 7/8" | 22mm |
| 1" | 25.5mm | ||
| 1-1/8" | 28.5mm | ||
| 1-3/16" | 30mm | ||
| 1-1/4" | 32mm | ||
| 1-5/16" | 33.5mm | ||
| 1-3/8" | 35mm | ||
| 1-1/2" | 38mm |